Which Process Should Businesses Automate First in a Factory?

Nov.03.2026

Automation is becoming an increasingly important part of improving production capabilities and optimizing business operations. However, for many factories, the most difficult question is not “Which robot should we buy?” but:

“Which process should we automate first?”

An automation project does not necessarily have to start with a large investment or a complex system. In many cases, selecting the right process — one that is highly repetitive, consumes significant human resources and has clearly measurable results — can be a more appropriate starting point.

A practical approach is:

Start with the right process → run a pilot → measure the results → optimize → scale up.

What matters is not how many processes a business can automate from the beginning, but whether the first process actually addresses a specific operational problem.

Why Should Businesses Not Start by Asking “Which Robot Should We Buy?”

When exploring automation, businesses often begin with the equipment itself: AMRs, AGVs, lifting robots, industrial robots or cobots.

But a robot is only a tool. The effectiveness of an automation project depends first on whether the business has correctly identified the problem it needs to solve.

The same type of robot may be suitable for one factory but unsuitable for another because of differences in:

  • Factory layout.
  • Transportation distance.
  • Load weight and dimensions.
  • Transportation frequency.
  • Pickup and delivery points.
  • Aisles and operating environment.
  • Current production processes.
  • Management systems and integration capabilities.

Therefore, instead of starting with robot selection, businesses should start with process analysis.

What Problem Is Automation Supposed to Solve?

A process may be considered for automation when the business is facing one or more of the following issues:

  • Employees have to perform repetitive tasks for long periods.
  • There are too many internal transportation trips.
  • Goods need to travel long distances.
  • The process depends heavily on human resources.
  • There are waiting times between processes.
  • The work involves potential safety risks.
  • Productivity is difficult to increase simply by adding more employees.
  • Operating costs are increasing without a corresponding improvement in efficiency.

Once the problem has been clearly identified, the business has a better basis for selecting the appropriate technology.

4 Criteria for Identifying the Right Process to Automate

Not every process in a factory should be automated immediately. A good starting point usually has several clear characteristics.

1. The Work Is Highly Repetitive

This is one of the easiest signs to identify.

If employees have to perform the same task or follow the same transportation route many times a day, that process may have strong automation potential.

Examples include:

  • Moving raw materials from the warehouse to the production line.
  • Moving work-in-process materials between production stages.
  • Moving pallets to staging areas.
  • Supplying materials to production lines.
  • Collecting empty containers or trays.

When a process is repeated frequently, robots can take over mechanical and repetitive tasks, allowing employees to focus on activities that require greater levels of handling, judgment and decision-making.

2. The Process Consumes Significant Labor or Resources

Businesses should not only look at the number of employees assigned to a process, but also consider the total resources being consumed.

A transportation route may require only one employee, but if that employee has to walk continuously for several hours, the process can still generate significant costs in terms of time and resources.

This becomes even more important in factories operating multiple shifts or with high transportation frequency.

3. The Process Creates a Bottleneck or Risk

A process should be considered a priority when it directly affects downstream operations.

For example:

  • Raw materials are not supplied to the production line on time.
  • Finished goods have to wait for transportation.
  • Pallets accumulate in intermediate areas.
  • Employees have to move excessively.
  • Transportation creates congestion during peak periods.
  • Certain tasks involve heavy working conditions or potential safety risks.

In these cases, automation is not only about reducing labor requirements but also about stabilizing the flow of operations.

4. The Results Can Be Measured

This is an important factor when a business starts an automation project.

Before making an investment, the business should identify indicators that can be compared before and after implementation, such as:

  • Transportation time.
  • Number of transportation trips per day.
  • Number of employees involved.
  • Travel distance.
  • Waiting time.
  • Output or productivity.
  • Operating costs.
  • Process stability.

When results can be measured, businesses can more easily evaluate the pilot project and determine whether it should be expanded.

Which Processes Are Often Suitable for Starting Automation?

Depending on the characteristics of each factory, several groups of tasks may have clear automation potential.

1. Material and Goods Transportation Within the Factory

This is one of the common applications of automation in internal logistics.

Robots can be used to transport:

  • Raw materials from warehouses to production lines.
  • Work-in-process materials between production stages.
  • Finished goods to staging areas.
  • Containers, trays or pallets.
  • Goods between warehouses and production areas.

For transportation routes with high frequency and relatively stable processes, businesses can consider AMRs, AGVs or other transportation robots suitable for the load and pickup-and-delivery method.

PAN Robotics currently provides various autonomous transportation robots for logistics and manufacturing applications, ranging from under-ride robots to high-payload AMRs.

2. Pallet Transportation and Lifting

If a factory frequently handles heavy pallets, this process can be evaluated separately rather than relying only on conventional transportation robots.

Depending on load capacity, lifting height, pallet type, layout and warehouse organization, possible solutions may include:

  • High-payload AMRs.
  • Automated lifting robots.
  • Autonomous forklifts.
  • Combined transportation and lifting solutions.

The objective is not simply to replace a forklift with a robot, but to automate the entire movement of goods from the pickup point to the delivery point when operating conditions allow.

3. Material Replenishment for Production Lines

Some factories have relatively regular material replenishment processes:

Warehouse → staging area → production line → empty tray/container return.

If employees have to make the same trips repeatedly throughout the day, this may be a suitable process for an automation pilot.

Robots can handle transportation tasks according to assigned missions, making material replenishment more proactive and easier to control.

4. Packaging and Palletizing

At the end of a production line, highly repetitive tasks such as picking, packaging or palletizing products may also be considered for automation using industrial robots or cobots, depending on the application.

However, these applications require careful assessment of:

  • Product characteristics.
  • Product weight.
  • Production line speed.
  • Cycle time.
  • Product feeding method.
  • Accuracy requirements.
  • Available installation space.

There is no single robot configuration suitable for every packaging line.

5. Repetitive Tasks or Tasks in Specialized Environments

Beyond transportation and production, some highly repetitive tasks or tasks that require employees to move continuously can also be considered for automation.

Examples may include robotic factory cleaning, internal transportation or other specialized tasks.

The key is still to clearly identify which tasks consume resources and whether a robot can perform them consistently, safely and effectively.

Not Every Process Should Be Automated

A common misconception is that the more robots a factory has, the more advanced it is.

In reality, automation only creates value when the technology is appropriate for the process.

Tasks With Very Low Frequency

If a task only occurs a few times a day or has no clear pattern, investing in a dedicated automation system may not deliver a proportionate return.

Processes That Change Frequently

If pickup points, delivery points, product types or production methods change frequently, the business needs to carefully evaluate the adaptability of the solution before investing.

Processes That Have Not Been Standardized

An unstable process is difficult to automate effectively.

Before introducing robots, the business may need to standardize:

  • Transportation routes.
  • Pickup and delivery points.
  • Pallet and container specifications.
  • Material handover procedures.
  • Safety rules.
  • Exception-handling procedures.

Automating a process that has not been standardized may simply make an unstable process more complicated.

Investment Costs That Are Not Proportionate to the Benefits

Ultimately, the business still needs to return to the economic aspect.

If a process has low labor costs, low frequency and limited ability to measure results, automation may not necessarily be the priority.

AMR, AGV or Lifting Robot: Which Should You Choose?

Once the process to be automated has been identified, the business can begin selecting the appropriate technology.

Business Need Potential Solution
Flexible transportation within the factory AMR
Stable and clearly defined transportation routes AGV
Transportation of heavy loads High-payload AMR/AGV
Pallet transportation and lifting Lifting robot/autonomous forklift
Production line replenishment AMR/AGV with appropriate delivery mechanism
Automation of repetitive operations Industrial robot/Cobot
Cleaning large areas Cleaning robot

AMR and AGV should not simply be viewed as a choice between which technology is “better”. The selection should be based on the layout, route, load capacity, transportation frequency, docking requirements, operating environment and integration capabilities of the existing system.

PAN Robotics currently provides transportation robots, lifting robots and mobile robot solutions combined with cobots for logistics and automation applications.

4-Step Roadmap to Start Automation

Instead of implementing automation across the entire factory at once, businesses can start with a specific problem and gradually expand.

Step 1: Survey and Assess the Current Situation

The first step is to understand how the process currently operates.

Information to be collected may include:

  • Factory layout.
  • Transportation routes.
  • Pickup and delivery points.
  • Type of goods.
  • Dimensions and load capacity.
  • Number of transportation trips per day.
  • Operating hours.
  • Number of employees involved.
  • Intersections and areas where people work.
  • Operating environment.
  • Existing management systems.

Step 2: Select One Problem for a Pilot

It is not necessary to automate the entire factory from the beginning.

A specific transportation route or a highly repetitive process can be selected as a pilot.

The purpose of the pilot is to verify:

  • Whether the robot meets operational requirements.
  • Whether the process is suitable for the robot.
  • Whether people and robots can work together safely.
  • Whether the system can be integrated into the existing process.
  • Whether actual results meet expectations.

Step 3: Measure and Optimize

After the pilot is implemented, the business should compare the data before and after deployment.

Key indicators may include:

Labor → time → number of transportation trips → distance → productivity → cost → process stability.

This gives the business a basis for evaluating actual performance instead of relying only on initial expectations.

Step 4: Scale Up

If the pilot demonstrates clear benefits, the business can continue expanding the solution to other routes or processes.

At this stage, experience from the first project can become a foundation for:

  • Standardizing processes.
  • Defining technical requirements.
  • Training employees.
  • Optimizing the fleet management system.
  • Connecting additional areas.
  • Gradually building a broader automation system.

This is the approach of “start small – optimize quickly – scale with evidence”, rather than making a large initial investment without certainty that the right problem is being solved.

Example: Automating Material Transportation in a Factory

Consider a relatively common situation.

Employees currently collect raw materials from the warehouse and transport them to the production line.

There may be dozens or hundreds of transportation trips every day.

Current Situation

  • Employees have to move continuously.
  • The route is relatively fixed.
  • There are many repetitive transportation trips.
  • The production line may have to wait when materials are not supplied on time.
  • Labor costs increase as production expands or additional shifts are added.

Analysis

This process has several characteristics that make it suitable for considering automation:

  • High repeatability.
  • High transportation frequency.
  • A clearly identifiable route.
  • Transportation demand can be measured.
  • Results can be measured before and after implementation.

Potential Solution

Depending on the load, goods, layout and handover method, the business can consider an AMR, AGV or suitable lifting robot.

PAN Robotics currently provides various autonomous transportation robots for material and goods transportation in factories and logistics environments, with some models supporting loads ranging from hundreds of kilograms to several tons.

Instead of implementing automation across the entire factory, the business can start with one warehouse-to-production-line route.

After a period of operation, performance indicators before and after implementation can be compared to evaluate the results.

If the results meet expectations, the model can be expanded to other routes.

What Should Businesses Prepare Before an Automation Survey?

An automation survey will be more effective if the business prepares basic information about the current process in advance.

Facility and Layout Information

  • Factory layout.
  • Aisle width.
  • Intersection areas.
  • Warehouse and production line locations.
  • Pickup and delivery points.

Goods Information

  • Type of goods.
  • Dimensions.
  • Weight.
  • Packaging specifications.
  • Pallets, containers or trays in use.

Operational Information

  • Number of transportation trips per day.
  • Distance per trip.
  • Transportation time.
  • Number of operating shifts.
  • Number of employees involved.
  • Peak operating periods.

System Information

  • WMS/MES/ERP, if available.
  • Equipment currently in use.
  • Current material handover process.
  • Integration requirements with machinery or production lines.

This information gives the technical team a basis for evaluating the problem before proposing a solution.

PAN Robotics: From Survey to Implementation

Automation is not simply about selecting a robot model.

A real-world project needs to be evaluated from the process, equipment and facility layout to system integration and long-term operation.

PAN Robotics provides and integrates robotics and automation solutions for manufacturing plants, smart warehouses, logistics and other operating environments. Its solutions include autonomous transportation robots, lifting robots, factory cleaning robots, mobile robots combined with cobots and related automation solutions.

The implementation process may include:

Survey → Problem Analysis → Solution Design → Technology Selection → Integration → Deployment → Training → Technical Support.

This approach allows businesses not simply to purchase a piece of equipment, but to build a solution that fits their actual operating processes.

Conclusion

Effective automation does not begin with a robot.

It begins with understanding which resources a process is consuming, what problems it is creating and whether technology can solve that problem more effectively.

For businesses starting their automation journey, processes that are highly repetitive, relatively stable, frequent and measurable are often worth considering first.

Material transportation, production line replenishment, pallet transportation and other repetitive internal logistics tasks may be suitable starting points — but the specific solution should still be determined after an actual site survey.

Instead of trying to automate everything from the beginning, businesses can:

Choose the right problem → run a pilot → measure the results → optimize → then scale up.

This is how automation can become more than a technology investment and instead serve as a practical tool for improving factory operations.

Considering automation but not sure where to start?

Contact PAN Robotics for a site survey, process assessment and consultation on robotics solutions suitable for your actual operational requirements.

PAN Trading JSC
📞 (+84) 28 3840 2222 | 0919 302 879
📍 No: 142, B2 Street, Sala Urban Area, An Khanh Ward, Ho Chi Minh City, Vietnam
🌐 https://panrobotics.vn | https://pantrading.vn
📩 contact@pantrading.vn

arrow_forward_ios
Sản phẩm khác
a